Small practice. Bright discoveries.Explore the free starter collection
Back to worksheets
ScienceAges 7-9

Conductors, insulators & circuits

Compare conductors and insulators, series and parallel circuits, switches, fuses and circuit symbols. Review suitability for your learners before teaching.

New variationTry interactive challengeBrowse templates

Choose “Save as PDF” to keep a copy. Use your browser’s paper setting for A4 or Letter.

Worksheet StudioPractice pack · Ages 7-9

Conductors, insulators & circuits

Take your time. Show your thinking.

  1. 1. What component has a resistance that decreases when brighter light shines on it (used in automatic street lights): a light-dependent resistor (LDR) or a thermistor?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  2. 2. Which circuit instrument is connected IN PARALLEL across a component to measure the potential difference (voltage) in volts (V): a voltmeter or an ammeter?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  3. 3. In a standard circuit diagram, what component is represented by a circle with an “X” (cross) inside it: a filament lamp (bulb) or a battery?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  4. 4. What is the role of the cell or battery in an electrical circuit: it provides the electrical energy (potential difference / voltage) that pushes charges around the circuit, or it absorbs light?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  5. 5. In a simple SERIES circuit containing one battery and two bulbs, if you add a third identical bulb in the same single loop, what happens to the brightness of the bulbs: they become dimmer because the voltage is shared and total resistance increases, or they become three times brighter?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  6. 6. For an electric current to flow and light up a bulb, what kind of path must the circuit form from one terminal of the battery to the other: a complete (closed) loop with no gaps, or a broken (open) loop?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  7. 7. What happens if two identical cells in a torch are put in facing opposite directions (+ touching +): their voltages cancel out and the bulb will not light, or the bulb shines twice as bright?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  8. 8. Which circuit instrument is connected IN SERIES in a loop to measure the electric current in amperes (A): an ammeter or a voltmeter?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  9. 9. Why should you NEVER touch mains electrical switches, plugs or sockets with wet hands: tap water contains dissolved salts (ions) that conduct electricity and can cause a dangerous electric shock, or water freezes the switch?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  10. 10. What circuit component allows current to flow in ONE direction only (and emits light when it is an LED): a diode (or light-emitting diode) or a fixed resistor?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  11. 11. In a simple SERIES circuit with two bulbs in a single loop, if one bulb’s filament breaks (blows), what happens to the other bulb: it goes out too because the single circuit loop is broken, or it stays lit?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  12. 12. Why are the lights and sockets in a home wired in PARALLEL rather than in series: each light is on its own branch so it receives full voltage and can be switched on or off independently without turning off the others, or parallel uses no wire?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
12 questions · Seed 309 · Age guidance, not curriculum certification
View the answer key
Worksheet StudioAnswer key · Ages 7-9

Conductors, insulators & circuits

Answers and reasoning. Review before teaching.

  1. 1. What component has a resistance that decreases when brighter light shines on it (used in automatic street lights): a light-dependent resistor (LDR) or a thermistor?

    Light-dependent resistor (LDR)

    In bright light an LDR’s resistance falls; in darkness its resistance rises.

  2. 2. Which circuit instrument is connected IN PARALLEL across a component to measure the potential difference (voltage) in volts (V): a voltmeter or an ammeter?

    Voltmeter

    A voltmeter has very high resistance and is connected across (in parallel with) a component.

  3. 3. In a standard circuit diagram, what component is represented by a circle with an “X” (cross) inside it: a filament lamp (bulb) or a battery?

    Filament lamp (bulb)

    A circle containing a cross is the standard circuit symbol for an indicator or lighting lamp.

  4. 4. What is the role of the cell or battery in an electrical circuit: it provides the electrical energy (potential difference / voltage) that pushes charges around the circuit, or it absorbs light?

    It provides the electrical energy (potential difference / voltage) that pushes charges around the circuit

    A cell converts stored chemical energy into electrical energy.

  5. 5. In a simple SERIES circuit containing one battery and two bulbs, if you add a third identical bulb in the same single loop, what happens to the brightness of the bulbs: they become dimmer because the voltage is shared and total resistance increases, or they become three times brighter?

    They become dimmer because the voltage is shared and total resistance increases

    In a series loop, adding more bulbs increases resistance and splits the battery voltage across more components.

  6. 6. For an electric current to flow and light up a bulb, what kind of path must the circuit form from one terminal of the battery to the other: a complete (closed) loop with no gaps, or a broken (open) loop?

    A complete (closed) loop with no gaps

    Current only flows around a continuous, closed conducting pathway.

  7. 7. What happens if two identical cells in a torch are put in facing opposite directions (+ touching +): their voltages cancel out and the bulb will not light, or the bulb shines twice as bright?

    Their voltages cancel out and the bulb will not light

    Cells in series must be aligned positive-to-negative so their voltages add together.

  8. 8. Which circuit instrument is connected IN SERIES in a loop to measure the electric current in amperes (A): an ammeter or a voltmeter?

    Ammeter

    An ammeter has very low resistance and is placed in series so all the current flows through it.

  9. 9. Why should you NEVER touch mains electrical switches, plugs or sockets with wet hands: tap water contains dissolved salts (ions) that conduct electricity and can cause a dangerous electric shock, or water freezes the switch?

    Tap water contains dissolved salts (ions) that conduct electricity and can cause a dangerous electric shock

    Impure water is an electrical conductor and lowers the electrical resistance of skin.

  10. 10. What circuit component allows current to flow in ONE direction only (and emits light when it is an LED): a diode (or light-emitting diode) or a fixed resistor?

    Diode (or light-emitting diode)

    A diode has low resistance in the forward direction and very high resistance in reverse.

  11. 11. In a simple SERIES circuit with two bulbs in a single loop, if one bulb’s filament breaks (blows), what happens to the other bulb: it goes out too because the single circuit loop is broken, or it stays lit?

    It goes out too because the single circuit loop is broken

    A break anywhere in a series loop stops current throughout the entire loop.

  12. 12. Why are the lights and sockets in a home wired in PARALLEL rather than in series: each light is on its own branch so it receives full voltage and can be switched on or off independently without turning off the others, or parallel uses no wire?

    Each light is on its own branch so it receives full voltage and can be switched on or off independently without turning off the others

    In a parallel circuit, if one lamp fails or is switched off, current still flows through the other branches.

12 questions · Seed 309 · Age guidance, not curriculum certification