Compare conductors and insulators, series and parallel circuits, switches, fuses and circuit symbols. Review suitability for your learners before teaching.
Choose “Save as PDF” to keep a copy. Use your browser’s paper setting for A4 or Letter.
Worksheet StudioPractice pack · Ages 7-9
Conductors, insulators & circuits
Take your time. Show your thinking.
1. In a parallel circuit, how does the total current leaving the battery compare to the currents in the individual parallel branches: the total current equals the sum of the currents in the branches, or the total current is zero?
Cell (+) ── Switch ── (−) · Closed Series Loop
2. In a simple SERIES circuit with two bulbs in a single loop, if one bulb’s filament breaks (blows), what happens to the other bulb: it goes out too because the single circuit loop is broken, or it stays lit?
Cell (+) ── Switch ── (−) · Closed Series Loop
3. Which non-metal form of carbon (used in pencil leads) is an exception because it DOES conduct electricity: graphite or rubber?
Cell (+) ── Switch ── (−) · Closed Series Loop
4. Which circuit instrument is connected IN PARALLEL across a component to measure the potential difference (voltage) in volts (V): a voltmeter or an ammeter?
Cell (+) ── Switch ── (−) · Closed Series Loop
5. Materials such as copper, aluminium, silver and steel that allow electric current to flow through them easily are called: electrical conductors or electrical insulators?
Cell (+) ── Switch ── (−) · Closed Series Loop
6. Why are the lights and sockets in a home wired in PARALLEL rather than in series: each light is on its own branch so it receives full voltage and can be switched on or off independently without turning off the others, or parallel uses no wire?
Cell (+) ── Switch ── (−) · Closed Series Loop
7. Why should you NEVER touch mains electrical switches, plugs or sockets with wet hands: tap water contains dissolved salts (ions) that conduct electricity and can cause a dangerous electric shock, or water freezes the switch?
Cell (+) ── Switch ── (−) · Closed Series Loop
8. In a simple SERIES circuit containing one battery and two bulbs, if you add a third identical bulb in the same single loop, what happens to the brightness of the bulbs: they become dimmer because the voltage is shared and total resistance increases, or they become three times brighter?
Cell (+) ── Switch ── (−) · Closed Series Loop
9. What happens when you open (turn off) a switch in a simple series circuit: it creates a gap (open circuit) that stops the current flowing and turns the bulb off, or it makes the bulb brighter?
Cell (+) ── Switch ── (−) · Closed Series Loop
10. What component has a resistance that decreases when brighter light shines on it (used in automatic street lights): a light-dependent resistor (LDR) or a thermistor?
Cell (+) ── Switch ── (−) · Closed Series Loop
11. For an electric current to flow and light up a bulb, what kind of path must the circuit form from one terminal of the battery to the other: a complete (closed) loop with no gaps, or a broken (open) loop?
Cell (+) ── Switch ── (−) · Closed Series Loop
12. Materials such as plastic, rubber, glass and dry wood that do NOT allow electric current to flow through them are called: electrical insulators or electrical conductors?
Cell (+) ── Switch ── (−) · Closed Series Loop
12 questions · Seed 104755 · Age guidance, not curriculum certification
View the answer key
Worksheet StudioAnswer key · Ages 7-9
Conductors, insulators & circuits
Answers and reasoning. Review before teaching.
1. In a parallel circuit, how does the total current leaving the battery compare to the currents in the individual parallel branches: the total current equals the sum of the currents in the branches, or the total current is zero?
The total current equals the sum of the currents in the branches
By Kirchhoff’s current law (conservation of charge), current splits at a junction and recombines on return.
2. In a simple SERIES circuit with two bulbs in a single loop, if one bulb’s filament breaks (blows), what happens to the other bulb: it goes out too because the single circuit loop is broken, or it stays lit?
It goes out too because the single circuit loop is broken
A break anywhere in a series loop stops current throughout the entire loop.
3. Which non-metal form of carbon (used in pencil leads) is an exception because it DOES conduct electricity: graphite or rubber?
Graphite
Graphite has delocalised electrons between its carbon layers, allowing it to conduct electricity.
4. Which circuit instrument is connected IN PARALLEL across a component to measure the potential difference (voltage) in volts (V): a voltmeter or an ammeter?
Voltmeter
A voltmeter has very high resistance and is connected across (in parallel with) a component.
5. Materials such as copper, aluminium, silver and steel that allow electric current to flow through them easily are called: electrical conductors or electrical insulators?
Electrical conductors
Metals have free-moving (delocalised) electrons that conduct electric current readily.
6. Why are the lights and sockets in a home wired in PARALLEL rather than in series: each light is on its own branch so it receives full voltage and can be switched on or off independently without turning off the others, or parallel uses no wire?
Each light is on its own branch so it receives full voltage and can be switched on or off independently without turning off the others
In a parallel circuit, if one lamp fails or is switched off, current still flows through the other branches.
7. Why should you NEVER touch mains electrical switches, plugs or sockets with wet hands: tap water contains dissolved salts (ions) that conduct electricity and can cause a dangerous electric shock, or water freezes the switch?
Tap water contains dissolved salts (ions) that conduct electricity and can cause a dangerous electric shock
Impure water is an electrical conductor and lowers the electrical resistance of skin.
8. In a simple SERIES circuit containing one battery and two bulbs, if you add a third identical bulb in the same single loop, what happens to the brightness of the bulbs: they become dimmer because the voltage is shared and total resistance increases, or they become three times brighter?
They become dimmer because the voltage is shared and total resistance increases
In a series loop, adding more bulbs increases resistance and splits the battery voltage across more components.
9. What happens when you open (turn off) a switch in a simple series circuit: it creates a gap (open circuit) that stops the current flowing and turns the bulb off, or it makes the bulb brighter?
It creates a gap (open circuit) that stops the current flowing and turns the bulb off
A switch controls a circuit by safely opening or closing the conducting gap.
10. What component has a resistance that decreases when brighter light shines on it (used in automatic street lights): a light-dependent resistor (LDR) or a thermistor?
Light-dependent resistor (LDR)
In bright light an LDR’s resistance falls; in darkness its resistance rises.
11. For an electric current to flow and light up a bulb, what kind of path must the circuit form from one terminal of the battery to the other: a complete (closed) loop with no gaps, or a broken (open) loop?
A complete (closed) loop with no gaps
Current only flows around a continuous, closed conducting pathway.
12. Materials such as plastic, rubber, glass and dry wood that do NOT allow electric current to flow through them are called: electrical insulators or electrical conductors?
Electrical insulators
Insulators have tightly bound electrons and block the flow of electric current.
12 questions · Seed 104755 · Age guidance, not curriculum certification
Worksheet StudioPractice pack · Ages 7-9
Conductors, insulators & circuits
Take your time. Show your thinking.
1. In a parallel circuit, how does the total current leaving the battery compare to the currents in the individual parallel branches: the total current equals the sum of the currents in the branches, or the total current is zero?
Cell (+) ── Switch ── (−) · Closed Series Loop
2. In a simple SERIES circuit with two bulbs in a single loop, if one bulb’s filament breaks (blows), what happens to the other bulb: it goes out too because the single circuit loop is broken, or it stays lit?
Cell (+) ── Switch ── (−) · Closed Series Loop
3. Which non-metal form of carbon (used in pencil leads) is an exception because it DOES conduct electricity: graphite or rubber?
Cell (+) ── Switch ── (−) · Closed Series Loop
4. Which circuit instrument is connected IN PARALLEL across a component to measure the potential difference (voltage) in volts (V): a voltmeter or an ammeter?
Cell (+) ── Switch ── (−) · Closed Series Loop
5. Materials such as copper, aluminium, silver and steel that allow electric current to flow through them easily are called: electrical conductors or electrical insulators?
Cell (+) ── Switch ── (−) · Closed Series Loop
6. Why are the lights and sockets in a home wired in PARALLEL rather than in series: each light is on its own branch so it receives full voltage and can be switched on or off independently without turning off the others, or parallel uses no wire?
Cell (+) ── Switch ── (−) · Closed Series Loop
7. Why should you NEVER touch mains electrical switches, plugs or sockets with wet hands: tap water contains dissolved salts (ions) that conduct electricity and can cause a dangerous electric shock, or water freezes the switch?
Cell (+) ── Switch ── (−) · Closed Series Loop
8. In a simple SERIES circuit containing one battery and two bulbs, if you add a third identical bulb in the same single loop, what happens to the brightness of the bulbs: they become dimmer because the voltage is shared and total resistance increases, or they become three times brighter?
Cell (+) ── Switch ── (−) · Closed Series Loop
9. What happens when you open (turn off) a switch in a simple series circuit: it creates a gap (open circuit) that stops the current flowing and turns the bulb off, or it makes the bulb brighter?
Cell (+) ── Switch ── (−) · Closed Series Loop
10. What component has a resistance that decreases when brighter light shines on it (used in automatic street lights): a light-dependent resistor (LDR) or a thermistor?
Cell (+) ── Switch ── (−) · Closed Series Loop
11. For an electric current to flow and light up a bulb, what kind of path must the circuit form from one terminal of the battery to the other: a complete (closed) loop with no gaps, or a broken (open) loop?
Cell (+) ── Switch ── (−) · Closed Series Loop
12. Materials such as plastic, rubber, glass and dry wood that do NOT allow electric current to flow through them are called: electrical insulators or electrical conductors?
Cell (+) ── Switch ── (−) · Closed Series Loop
12 questions · Seed 104755 · Age guidance, not curriculum certification
Worksheet StudioAnswer key · Ages 7-9
Conductors, insulators & circuits
Answers and reasoning. Review before teaching.
1. In a parallel circuit, how does the total current leaving the battery compare to the currents in the individual parallel branches: the total current equals the sum of the currents in the branches, or the total current is zero?
The total current equals the sum of the currents in the branches
By Kirchhoff’s current law (conservation of charge), current splits at a junction and recombines on return.
2. In a simple SERIES circuit with two bulbs in a single loop, if one bulb’s filament breaks (blows), what happens to the other bulb: it goes out too because the single circuit loop is broken, or it stays lit?
It goes out too because the single circuit loop is broken
A break anywhere in a series loop stops current throughout the entire loop.
3. Which non-metal form of carbon (used in pencil leads) is an exception because it DOES conduct electricity: graphite or rubber?
Graphite
Graphite has delocalised electrons between its carbon layers, allowing it to conduct electricity.
4. Which circuit instrument is connected IN PARALLEL across a component to measure the potential difference (voltage) in volts (V): a voltmeter or an ammeter?
Voltmeter
A voltmeter has very high resistance and is connected across (in parallel with) a component.
5. Materials such as copper, aluminium, silver and steel that allow electric current to flow through them easily are called: electrical conductors or electrical insulators?
Electrical conductors
Metals have free-moving (delocalised) electrons that conduct electric current readily.
6. Why are the lights and sockets in a home wired in PARALLEL rather than in series: each light is on its own branch so it receives full voltage and can be switched on or off independently without turning off the others, or parallel uses no wire?
Each light is on its own branch so it receives full voltage and can be switched on or off independently without turning off the others
In a parallel circuit, if one lamp fails or is switched off, current still flows through the other branches.
7. Why should you NEVER touch mains electrical switches, plugs or sockets with wet hands: tap water contains dissolved salts (ions) that conduct electricity and can cause a dangerous electric shock, or water freezes the switch?
Tap water contains dissolved salts (ions) that conduct electricity and can cause a dangerous electric shock
Impure water is an electrical conductor and lowers the electrical resistance of skin.
8. In a simple SERIES circuit containing one battery and two bulbs, if you add a third identical bulb in the same single loop, what happens to the brightness of the bulbs: they become dimmer because the voltage is shared and total resistance increases, or they become three times brighter?
They become dimmer because the voltage is shared and total resistance increases
In a series loop, adding more bulbs increases resistance and splits the battery voltage across more components.
9. What happens when you open (turn off) a switch in a simple series circuit: it creates a gap (open circuit) that stops the current flowing and turns the bulb off, or it makes the bulb brighter?
It creates a gap (open circuit) that stops the current flowing and turns the bulb off
A switch controls a circuit by safely opening or closing the conducting gap.
10. What component has a resistance that decreases when brighter light shines on it (used in automatic street lights): a light-dependent resistor (LDR) or a thermistor?
Light-dependent resistor (LDR)
In bright light an LDR’s resistance falls; in darkness its resistance rises.
11. For an electric current to flow and light up a bulb, what kind of path must the circuit form from one terminal of the battery to the other: a complete (closed) loop with no gaps, or a broken (open) loop?
A complete (closed) loop with no gaps
Current only flows around a continuous, closed conducting pathway.
12. Materials such as plastic, rubber, glass and dry wood that do NOT allow electric current to flow through them are called: electrical insulators or electrical conductors?
Electrical insulators
Insulators have tightly bound electrons and block the flow of electric current.
12 questions · Seed 104755 · Age guidance, not curriculum certification