Compare conductors and insulators, series and parallel circuits, switches, fuses and circuit symbols. Review suitability for your learners before teaching.
Choose “Save as PDF” to keep a copy. Use your browser’s paper setting for A4 or Letter.
Worksheet StudioPractice pack · Ages 10-12
Conductors, insulators & circuits
Take your time. Show your thinking.
1. Why are electrical wires made with a copper metal core on the inside and a flexible plastic coating on the outside: copper conducts the electricity while the plastic insulator prevents electric shocks and short circuits, or plastic conducts electricity?
Cell (+) ── Switch ── (−) · Closed Series Loop
2. If you add a second cell in series (pointing in the same direction, + to −) to a circuit with a single bulb, what happens to the bulb: it shines more brightly because the voltage pushing the current has doubled, or it goes out?
Cell (+) ── Switch ── (−) · Closed Series Loop
3. In a standard circuit diagram, what does a long thin vertical line paired with a shorter, thicker vertical line represent: a single electrical cell, or an open switch?
Cell (+) ── Switch ── (−) · Closed Series Loop
4. Which circuit instrument is connected IN PARALLEL across a component to measure the potential difference (voltage) in volts (V): a voltmeter or an ammeter?
Cell (+) ── Switch ── (−) · Closed Series Loop
5. What safety device inside a plug or fusebox contains a thin wire designed to melt and break the circuit if the current becomes dangerously high: a fuse or a motor?
Cell (+) ── Switch ── (−) · Closed Series Loop
6. Why are the lights and sockets in a home wired in PARALLEL rather than in series: each light is on its own branch so it receives full voltage and can be switched on or off independently without turning off the others, or parallel uses no wire?
Cell (+) ── Switch ── (−) · Closed Series Loop
7. What component has a resistance that decreases when brighter light shines on it (used in automatic street lights): a light-dependent resistor (LDR) or a thermistor?
Cell (+) ── Switch ── (−) · Closed Series Loop
8. What happens if two identical cells in a torch are put in facing opposite directions (+ touching +): their voltages cancel out and the bulb will not light, or the bulb shines twice as bright?
Cell (+) ── Switch ── (−) · Closed Series Loop
9. Materials such as plastic, rubber, glass and dry wood that do NOT allow electric current to flow through them are called: electrical insulators or electrical conductors?
Cell (+) ── Switch ── (−) · Closed Series Loop
10. For an electric current to flow and light up a bulb, what kind of path must the circuit form from one terminal of the battery to the other: a complete (closed) loop with no gaps, or a broken (open) loop?
Cell (+) ── Switch ── (−) · Closed Series Loop
11. In a simple SERIES circuit containing one battery and two bulbs, if you add a third identical bulb in the same single loop, what happens to the brightness of the bulbs: they become dimmer because the voltage is shared and total resistance increases, or they become three times brighter?
Cell (+) ── Switch ── (−) · Closed Series Loop
12. In a standard circuit diagram, what component is represented by a circle with an “X” (cross) inside it: a filament lamp (bulb) or a battery?
Cell (+) ── Switch ── (−) · Closed Series Loop
12 questions · Seed 399 · Age guidance, not curriculum certification
Worksheet StudioPractice pack · Ages 10-12
Conductors, insulators & circuits
Take your time. Show your thinking.
1. Why are electrical wires made with a copper metal core on the inside and a flexible plastic coating on the outside: copper conducts the electricity while the plastic insulator prevents electric shocks and short circuits, or plastic conducts electricity?
Cell (+) ── Switch ── (−) · Closed Series Loop
2. If you add a second cell in series (pointing in the same direction, + to −) to a circuit with a single bulb, what happens to the bulb: it shines more brightly because the voltage pushing the current has doubled, or it goes out?
Cell (+) ── Switch ── (−) · Closed Series Loop
3. In a standard circuit diagram, what does a long thin vertical line paired with a shorter, thicker vertical line represent: a single electrical cell, or an open switch?
Cell (+) ── Switch ── (−) · Closed Series Loop
4. Which circuit instrument is connected IN PARALLEL across a component to measure the potential difference (voltage) in volts (V): a voltmeter or an ammeter?
Cell (+) ── Switch ── (−) · Closed Series Loop
5. What safety device inside a plug or fusebox contains a thin wire designed to melt and break the circuit if the current becomes dangerously high: a fuse or a motor?
Cell (+) ── Switch ── (−) · Closed Series Loop
6. Why are the lights and sockets in a home wired in PARALLEL rather than in series: each light is on its own branch so it receives full voltage and can be switched on or off independently without turning off the others, or parallel uses no wire?
Cell (+) ── Switch ── (−) · Closed Series Loop
7. What component has a resistance that decreases when brighter light shines on it (used in automatic street lights): a light-dependent resistor (LDR) or a thermistor?
Cell (+) ── Switch ── (−) · Closed Series Loop
8. What happens if two identical cells in a torch are put in facing opposite directions (+ touching +): their voltages cancel out and the bulb will not light, or the bulb shines twice as bright?
Cell (+) ── Switch ── (−) · Closed Series Loop
9. Materials such as plastic, rubber, glass and dry wood that do NOT allow electric current to flow through them are called: electrical insulators or electrical conductors?
Cell (+) ── Switch ── (−) · Closed Series Loop
10. For an electric current to flow and light up a bulb, what kind of path must the circuit form from one terminal of the battery to the other: a complete (closed) loop with no gaps, or a broken (open) loop?
Cell (+) ── Switch ── (−) · Closed Series Loop
11. In a simple SERIES circuit containing one battery and two bulbs, if you add a third identical bulb in the same single loop, what happens to the brightness of the bulbs: they become dimmer because the voltage is shared and total resistance increases, or they become three times brighter?
Cell (+) ── Switch ── (−) · Closed Series Loop
12. In a standard circuit diagram, what component is represented by a circle with an “X” (cross) inside it: a filament lamp (bulb) or a battery?
Cell (+) ── Switch ── (−) · Closed Series Loop
12 questions · Seed 399 · Age guidance, not curriculum certification
Worksheet StudioAnswer key · Ages 10-12
Conductors, insulators & circuits
Answers and reasoning. Review before teaching.
1. Why are electrical wires made with a copper metal core on the inside and a flexible plastic coating on the outside: copper conducts the electricity while the plastic insulator prevents electric shocks and short circuits, or plastic conducts electricity?
Copper conducts the electricity while the plastic insulator prevents electric shocks and short circuits
The metal core carries current; the outer plastic sheath keeps users safe.
2. If you add a second cell in series (pointing in the same direction, + to −) to a circuit with a single bulb, what happens to the bulb: it shines more brightly because the voltage pushing the current has doubled, or it goes out?
It shines more brightly because the voltage pushing the current has doubled
Two 1.5 V cells connected correctly in series supply 3.0 V, increasing the current through the bulb.
3. In a standard circuit diagram, what does a long thin vertical line paired with a shorter, thicker vertical line represent: a single electrical cell, or an open switch?
Single electrical cell
The long line marks the positive (+) terminal and the short thick line marks the negative (−) terminal of a cell.
4. Which circuit instrument is connected IN PARALLEL across a component to measure the potential difference (voltage) in volts (V): a voltmeter or an ammeter?
Voltmeter
A voltmeter has very high resistance and is connected across (in parallel with) a component.
5. What safety device inside a plug or fusebox contains a thin wire designed to melt and break the circuit if the current becomes dangerously high: a fuse or a motor?
Fuse
If a fault causes excessive current, the fuse wire melts, cutting off the electricity to prevent overheating and fire.
6. Why are the lights and sockets in a home wired in PARALLEL rather than in series: each light is on its own branch so it receives full voltage and can be switched on or off independently without turning off the others, or parallel uses no wire?
Each light is on its own branch so it receives full voltage and can be switched on or off independently without turning off the others
In a parallel circuit, if one lamp fails or is switched off, current still flows through the other branches.
7. What component has a resistance that decreases when brighter light shines on it (used in automatic street lights): a light-dependent resistor (LDR) or a thermistor?
Light-dependent resistor (LDR)
In bright light an LDR’s resistance falls; in darkness its resistance rises.
8. What happens if two identical cells in a torch are put in facing opposite directions (+ touching +): their voltages cancel out and the bulb will not light, or the bulb shines twice as bright?
Their voltages cancel out and the bulb will not light
Cells in series must be aligned positive-to-negative so their voltages add together.
9. Materials such as plastic, rubber, glass and dry wood that do NOT allow electric current to flow through them are called: electrical insulators or electrical conductors?
Electrical insulators
Insulators have tightly bound electrons and block the flow of electric current.
10. For an electric current to flow and light up a bulb, what kind of path must the circuit form from one terminal of the battery to the other: a complete (closed) loop with no gaps, or a broken (open) loop?
A complete (closed) loop with no gaps
Current only flows around a continuous, closed conducting pathway.
11. In a simple SERIES circuit containing one battery and two bulbs, if you add a third identical bulb in the same single loop, what happens to the brightness of the bulbs: they become dimmer because the voltage is shared and total resistance increases, or they become three times brighter?
They become dimmer because the voltage is shared and total resistance increases
In a series loop, adding more bulbs increases resistance and splits the battery voltage across more components.
12. In a standard circuit diagram, what component is represented by a circle with an “X” (cross) inside it: a filament lamp (bulb) or a battery?
Filament lamp (bulb)
A circle containing a cross is the standard circuit symbol for an indicator or lighting lamp.
12 questions · Seed 399 · Age guidance, not curriculum certification