Small practice. Bright discoveries.Explore the free starter collection
Back to worksheets
ScienceAges 10-12

Conductors, insulators & circuits

Compare conductors and insulators, series and parallel circuits, switches, fuses and circuit symbols. Review suitability for your learners before teaching.

New variationTry interactive challengeBrowse templates

Choose “Save as PDF” to keep a copy. Use your browser’s paper setting for A4 or Letter.

Worksheet StudioPractice pack · Ages 10-12

Conductors, insulators & circuits

Take your time. Show your thinking.

  1. 1. Which circuit instrument is connected IN SERIES in a loop to measure the electric current in amperes (A): an ammeter or a voltmeter?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  2. 2. Which circuit instrument is connected IN PARALLEL across a component to measure the potential difference (voltage) in volts (V): a voltmeter or an ammeter?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  3. 3. Which non-metal form of carbon (used in pencil leads) is an exception because it DOES conduct electricity: graphite or rubber?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  4. 4. In a standard circuit diagram, what does a long thin vertical line paired with a shorter, thicker vertical line represent: a single electrical cell, or an open switch?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  5. 5. What component has a resistance that decreases when brighter light shines on it (used in automatic street lights): a light-dependent resistor (LDR) or a thermistor?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  6. 6. Materials such as plastic, rubber, glass and dry wood that do NOT allow electric current to flow through them are called: electrical insulators or electrical conductors?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  7. 7. In a simple SERIES circuit containing one battery and two bulbs, if you add a third identical bulb in the same single loop, what happens to the brightness of the bulbs: they become dimmer because the voltage is shared and total resistance increases, or they become three times brighter?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  8. 8. In a series circuit, how does the electric current measured at different points around the single loop compare: the current is the SAME at every point in a series loop, or it gets used up by the bulb?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  9. 9. What happens when you open (turn off) a switch in a simple series circuit: it creates a gap (open circuit) that stops the current flowing and turns the bulb off, or it makes the bulb brighter?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  10. 10. In a parallel circuit, how does the total current leaving the battery compare to the currents in the individual parallel branches: the total current equals the sum of the currents in the branches, or the total current is zero?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  11. 11. What component has a resistance that changes significantly with temperature (used in digital thermometers and thermostats): a thermistor or a loudspeaker?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  12. 12. In a simple SERIES circuit with two bulbs in a single loop, if one bulb’s filament breaks (blows), what happens to the other bulb: it goes out too because the single circuit loop is broken, or it stays lit?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
12 questions · Seed 296 · Age guidance, not curriculum certification
View the answer key
Worksheet StudioAnswer key · Ages 10-12

Conductors, insulators & circuits

Answers and reasoning. Review before teaching.

  1. 1. Which circuit instrument is connected IN SERIES in a loop to measure the electric current in amperes (A): an ammeter or a voltmeter?

    Ammeter

    An ammeter has very low resistance and is placed in series so all the current flows through it.

  2. 2. Which circuit instrument is connected IN PARALLEL across a component to measure the potential difference (voltage) in volts (V): a voltmeter or an ammeter?

    Voltmeter

    A voltmeter has very high resistance and is connected across (in parallel with) a component.

  3. 3. Which non-metal form of carbon (used in pencil leads) is an exception because it DOES conduct electricity: graphite or rubber?

    Graphite

    Graphite has delocalised electrons between its carbon layers, allowing it to conduct electricity.

  4. 4. In a standard circuit diagram, what does a long thin vertical line paired with a shorter, thicker vertical line represent: a single electrical cell, or an open switch?

    Single electrical cell

    The long line marks the positive (+) terminal and the short thick line marks the negative (−) terminal of a cell.

  5. 5. What component has a resistance that decreases when brighter light shines on it (used in automatic street lights): a light-dependent resistor (LDR) or a thermistor?

    Light-dependent resistor (LDR)

    In bright light an LDR’s resistance falls; in darkness its resistance rises.

  6. 6. Materials such as plastic, rubber, glass and dry wood that do NOT allow electric current to flow through them are called: electrical insulators or electrical conductors?

    Electrical insulators

    Insulators have tightly bound electrons and block the flow of electric current.

  7. 7. In a simple SERIES circuit containing one battery and two bulbs, if you add a third identical bulb in the same single loop, what happens to the brightness of the bulbs: they become dimmer because the voltage is shared and total resistance increases, or they become three times brighter?

    They become dimmer because the voltage is shared and total resistance increases

    In a series loop, adding more bulbs increases resistance and splits the battery voltage across more components.

  8. 8. In a series circuit, how does the electric current measured at different points around the single loop compare: the current is the SAME at every point in a series loop, or it gets used up by the bulb?

    The current is the SAME at every point in a series loop

    Charge is conserved—the same number of coulombs per second passes every point in a single loop; energy is transferred, not current used up.

  9. 9. What happens when you open (turn off) a switch in a simple series circuit: it creates a gap (open circuit) that stops the current flowing and turns the bulb off, or it makes the bulb brighter?

    It creates a gap (open circuit) that stops the current flowing and turns the bulb off

    A switch controls a circuit by safely opening or closing the conducting gap.

  10. 10. In a parallel circuit, how does the total current leaving the battery compare to the currents in the individual parallel branches: the total current equals the sum of the currents in the branches, or the total current is zero?

    The total current equals the sum of the currents in the branches

    By Kirchhoff’s current law (conservation of charge), current splits at a junction and recombines on return.

  11. 11. What component has a resistance that changes significantly with temperature (used in digital thermometers and thermostats): a thermistor or a loudspeaker?

    Thermistor

    A thermistor is a temperature-sensitive resistor.

  12. 12. In a simple SERIES circuit with two bulbs in a single loop, if one bulb’s filament breaks (blows), what happens to the other bulb: it goes out too because the single circuit loop is broken, or it stays lit?

    It goes out too because the single circuit loop is broken

    A break anywhere in a series loop stops current throughout the entire loop.

12 questions · Seed 296 · Age guidance, not curriculum certification