Compare conductors and insulators, series and parallel circuits, switches, fuses and circuit symbols. Review suitability for your learners before teaching.
Choose “Save as PDF” to keep a copy. Use your browser’s paper setting for A4 or Letter.
Worksheet StudioPractice pack · Ages 10-12
Conductors, insulators & circuits
Take your time. Show your thinking.
1. What circuit component allows current to flow in ONE direction only (and emits light when it is an LED): a diode (or light-emitting diode) or a fixed resistor?
Cell (+) ── Switch ── (−) · Closed Series Loop
2. What safety device inside a plug or fusebox contains a thin wire designed to melt and break the circuit if the current becomes dangerously high: a fuse or a motor?
Cell (+) ── Switch ── (−) · Closed Series Loop
3. What is the role of the cell or battery in an electrical circuit: it provides the electrical energy (potential difference / voltage) that pushes charges around the circuit, or it absorbs light?
Cell (+) ── Switch ── (−) · Closed Series Loop
4. In a series circuit, how does the electric current measured at different points around the single loop compare: the current is the SAME at every point in a series loop, or it gets used up by the bulb?
Cell (+) ── Switch ── (−) · Closed Series Loop
5. What happens if two identical cells in a torch are put in facing opposite directions (+ touching +): their voltages cancel out and the bulb will not light, or the bulb shines twice as bright?
Cell (+) ── Switch ── (−) · Closed Series Loop
6. In a standard circuit diagram, what component is represented by a circle with an “X” (cross) inside it: a filament lamp (bulb) or a battery?
Cell (+) ── Switch ── (−) · Closed Series Loop
7. Which circuit instrument is connected IN PARALLEL across a component to measure the potential difference (voltage) in volts (V): a voltmeter or an ammeter?
Cell (+) ── Switch ── (−) · Closed Series Loop
8. If you add a second cell in series (pointing in the same direction, + to −) to a circuit with a single bulb, what happens to the bulb: it shines more brightly because the voltage pushing the current has doubled, or it goes out?
Cell (+) ── Switch ── (−) · Closed Series Loop
9. What component has a resistance that changes significantly with temperature (used in digital thermometers and thermostats): a thermistor or a loudspeaker?
Cell (+) ── Switch ── (−) · Closed Series Loop
10. What component has a resistance that decreases when brighter light shines on it (used in automatic street lights): a light-dependent resistor (LDR) or a thermistor?
Cell (+) ── Switch ── (−) · Closed Series Loop
11. Why are the lights and sockets in a home wired in PARALLEL rather than in series: each light is on its own branch so it receives full voltage and can be switched on or off independently without turning off the others, or parallel uses no wire?
Cell (+) ── Switch ── (−) · Closed Series Loop
12. Materials such as copper, aluminium, silver and steel that allow electric current to flow through them easily are called: electrical conductors or electrical insulators?
Cell (+) ── Switch ── (−) · Closed Series Loop
12 questions · Seed 104897 · Age guidance, not curriculum certification
Worksheet StudioPractice pack · Ages 10-12
Conductors, insulators & circuits
Take your time. Show your thinking.
1. What circuit component allows current to flow in ONE direction only (and emits light when it is an LED): a diode (or light-emitting diode) or a fixed resistor?
Cell (+) ── Switch ── (−) · Closed Series Loop
2. What safety device inside a plug or fusebox contains a thin wire designed to melt and break the circuit if the current becomes dangerously high: a fuse or a motor?
Cell (+) ── Switch ── (−) · Closed Series Loop
3. What is the role of the cell or battery in an electrical circuit: it provides the electrical energy (potential difference / voltage) that pushes charges around the circuit, or it absorbs light?
Cell (+) ── Switch ── (−) · Closed Series Loop
4. In a series circuit, how does the electric current measured at different points around the single loop compare: the current is the SAME at every point in a series loop, or it gets used up by the bulb?
Cell (+) ── Switch ── (−) · Closed Series Loop
5. What happens if two identical cells in a torch are put in facing opposite directions (+ touching +): their voltages cancel out and the bulb will not light, or the bulb shines twice as bright?
Cell (+) ── Switch ── (−) · Closed Series Loop
6. In a standard circuit diagram, what component is represented by a circle with an “X” (cross) inside it: a filament lamp (bulb) or a battery?
Cell (+) ── Switch ── (−) · Closed Series Loop
7. Which circuit instrument is connected IN PARALLEL across a component to measure the potential difference (voltage) in volts (V): a voltmeter or an ammeter?
Cell (+) ── Switch ── (−) · Closed Series Loop
8. If you add a second cell in series (pointing in the same direction, + to −) to a circuit with a single bulb, what happens to the bulb: it shines more brightly because the voltage pushing the current has doubled, or it goes out?
Cell (+) ── Switch ── (−) · Closed Series Loop
9. What component has a resistance that changes significantly with temperature (used in digital thermometers and thermostats): a thermistor or a loudspeaker?
Cell (+) ── Switch ── (−) · Closed Series Loop
10. What component has a resistance that decreases when brighter light shines on it (used in automatic street lights): a light-dependent resistor (LDR) or a thermistor?
Cell (+) ── Switch ── (−) · Closed Series Loop
11. Why are the lights and sockets in a home wired in PARALLEL rather than in series: each light is on its own branch so it receives full voltage and can be switched on or off independently without turning off the others, or parallel uses no wire?
Cell (+) ── Switch ── (−) · Closed Series Loop
12. Materials such as copper, aluminium, silver and steel that allow electric current to flow through them easily are called: electrical conductors or electrical insulators?
Cell (+) ── Switch ── (−) · Closed Series Loop
12 questions · Seed 104897 · Age guidance, not curriculum certification
Worksheet StudioAnswer key · Ages 10-12
Conductors, insulators & circuits
Answers and reasoning. Review before teaching.
1. What circuit component allows current to flow in ONE direction only (and emits light when it is an LED): a diode (or light-emitting diode) or a fixed resistor?
Diode (or light-emitting diode)
A diode has low resistance in the forward direction and very high resistance in reverse.
2. What safety device inside a plug or fusebox contains a thin wire designed to melt and break the circuit if the current becomes dangerously high: a fuse or a motor?
Fuse
If a fault causes excessive current, the fuse wire melts, cutting off the electricity to prevent overheating and fire.
3. What is the role of the cell or battery in an electrical circuit: it provides the electrical energy (potential difference / voltage) that pushes charges around the circuit, or it absorbs light?
It provides the electrical energy (potential difference / voltage) that pushes charges around the circuit
A cell converts stored chemical energy into electrical energy.
4. In a series circuit, how does the electric current measured at different points around the single loop compare: the current is the SAME at every point in a series loop, or it gets used up by the bulb?
The current is the SAME at every point in a series loop
Charge is conserved—the same number of coulombs per second passes every point in a single loop; energy is transferred, not current used up.
5. What happens if two identical cells in a torch are put in facing opposite directions (+ touching +): their voltages cancel out and the bulb will not light, or the bulb shines twice as bright?
Their voltages cancel out and the bulb will not light
Cells in series must be aligned positive-to-negative so their voltages add together.
6. In a standard circuit diagram, what component is represented by a circle with an “X” (cross) inside it: a filament lamp (bulb) or a battery?
Filament lamp (bulb)
A circle containing a cross is the standard circuit symbol for an indicator or lighting lamp.
7. Which circuit instrument is connected IN PARALLEL across a component to measure the potential difference (voltage) in volts (V): a voltmeter or an ammeter?
Voltmeter
A voltmeter has very high resistance and is connected across (in parallel with) a component.
8. If you add a second cell in series (pointing in the same direction, + to −) to a circuit with a single bulb, what happens to the bulb: it shines more brightly because the voltage pushing the current has doubled, or it goes out?
It shines more brightly because the voltage pushing the current has doubled
Two 1.5 V cells connected correctly in series supply 3.0 V, increasing the current through the bulb.
9. What component has a resistance that changes significantly with temperature (used in digital thermometers and thermostats): a thermistor or a loudspeaker?
Thermistor
A thermistor is a temperature-sensitive resistor.
10. What component has a resistance that decreases when brighter light shines on it (used in automatic street lights): a light-dependent resistor (LDR) or a thermistor?
Light-dependent resistor (LDR)
In bright light an LDR’s resistance falls; in darkness its resistance rises.
11. Why are the lights and sockets in a home wired in PARALLEL rather than in series: each light is on its own branch so it receives full voltage and can be switched on or off independently without turning off the others, or parallel uses no wire?
Each light is on its own branch so it receives full voltage and can be switched on or off independently without turning off the others
In a parallel circuit, if one lamp fails or is switched off, current still flows through the other branches.
12. Materials such as copper, aluminium, silver and steel that allow electric current to flow through them easily are called: electrical conductors or electrical insulators?
Electrical conductors
Metals have free-moving (delocalised) electrons that conduct electric current readily.
12 questions · Seed 104897 · Age guidance, not curriculum certification