Small practice. Bright discoveries.Explore the free starter collection
Back to worksheets
ScienceAges 10-12

Conductors, insulators & circuits

Compare conductors and insulators, series and parallel circuits, switches, fuses and circuit symbols. Review suitability for your learners before teaching.

New variationTry interactive challengeBrowse templates

Choose “Save as PDF” to keep a copy. Use your browser’s paper setting for A4 or Letter.

Worksheet StudioPractice pack · Ages 10-12

Conductors, insulators & circuits

Take your time. Show your thinking.

  1. 1. What safety device inside a plug or fusebox contains a thin wire designed to melt and break the circuit if the current becomes dangerously high: a fuse or a motor?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  2. 2. Which circuit instrument is connected IN PARALLEL across a component to measure the potential difference (voltage) in volts (V): a voltmeter or an ammeter?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  3. 3. In a simple SERIES circuit containing one battery and two bulbs, if you add a third identical bulb in the same single loop, what happens to the brightness of the bulbs: they become dimmer because the voltage is shared and total resistance increases, or they become three times brighter?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  4. 4. Materials such as plastic, rubber, glass and dry wood that do NOT allow electric current to flow through them are called: electrical insulators or electrical conductors?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  5. 5. Which non-metal form of carbon (used in pencil leads) is an exception because it DOES conduct electricity: graphite or rubber?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  6. 6. What happens if two identical cells in a torch are put in facing opposite directions (+ touching +): their voltages cancel out and the bulb will not light, or the bulb shines twice as bright?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  7. 7. For an electric current to flow and light up a bulb, what kind of path must the circuit form from one terminal of the battery to the other: a complete (closed) loop with no gaps, or a broken (open) loop?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  8. 8. In a series circuit, how does the electric current measured at different points around the single loop compare: the current is the SAME at every point in a series loop, or it gets used up by the bulb?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  9. 9. In a standard circuit diagram, what component is represented by a circle with the letter “M” inside it: an electric motor or a buzzer?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  10. 10. In a standard circuit diagram, what does a long thin vertical line paired with a shorter, thicker vertical line represent: a single electrical cell, or an open switch?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  11. 11. What circuit component allows current to flow in ONE direction only (and emits light when it is an LED): a diode (or light-emitting diode) or a fixed resistor?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  12. 12. What component has a resistance that decreases when brighter light shines on it (used in automatic street lights): a light-dependent resistor (LDR) or a thermistor?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
12 questions · Seed 104840 · Age guidance, not curriculum certification
View the answer key
Worksheet StudioAnswer key · Ages 10-12

Conductors, insulators & circuits

Answers and reasoning. Review before teaching.

  1. 1. What safety device inside a plug or fusebox contains a thin wire designed to melt and break the circuit if the current becomes dangerously high: a fuse or a motor?

    Fuse

    If a fault causes excessive current, the fuse wire melts, cutting off the electricity to prevent overheating and fire.

  2. 2. Which circuit instrument is connected IN PARALLEL across a component to measure the potential difference (voltage) in volts (V): a voltmeter or an ammeter?

    Voltmeter

    A voltmeter has very high resistance and is connected across (in parallel with) a component.

  3. 3. In a simple SERIES circuit containing one battery and two bulbs, if you add a third identical bulb in the same single loop, what happens to the brightness of the bulbs: they become dimmer because the voltage is shared and total resistance increases, or they become three times brighter?

    They become dimmer because the voltage is shared and total resistance increases

    In a series loop, adding more bulbs increases resistance and splits the battery voltage across more components.

  4. 4. Materials such as plastic, rubber, glass and dry wood that do NOT allow electric current to flow through them are called: electrical insulators or electrical conductors?

    Electrical insulators

    Insulators have tightly bound electrons and block the flow of electric current.

  5. 5. Which non-metal form of carbon (used in pencil leads) is an exception because it DOES conduct electricity: graphite or rubber?

    Graphite

    Graphite has delocalised electrons between its carbon layers, allowing it to conduct electricity.

  6. 6. What happens if two identical cells in a torch are put in facing opposite directions (+ touching +): their voltages cancel out and the bulb will not light, or the bulb shines twice as bright?

    Their voltages cancel out and the bulb will not light

    Cells in series must be aligned positive-to-negative so their voltages add together.

  7. 7. For an electric current to flow and light up a bulb, what kind of path must the circuit form from one terminal of the battery to the other: a complete (closed) loop with no gaps, or a broken (open) loop?

    A complete (closed) loop with no gaps

    Current only flows around a continuous, closed conducting pathway.

  8. 8. In a series circuit, how does the electric current measured at different points around the single loop compare: the current is the SAME at every point in a series loop, or it gets used up by the bulb?

    The current is the SAME at every point in a series loop

    Charge is conserved—the same number of coulombs per second passes every point in a single loop; energy is transferred, not current used up.

  9. 9. In a standard circuit diagram, what component is represented by a circle with the letter “M” inside it: an electric motor or a buzzer?

    Electric motor

    A circle with an “M” represents an electric motor that converts electrical energy into kinetic rotation.

  10. 10. In a standard circuit diagram, what does a long thin vertical line paired with a shorter, thicker vertical line represent: a single electrical cell, or an open switch?

    Single electrical cell

    The long line marks the positive (+) terminal and the short thick line marks the negative (−) terminal of a cell.

  11. 11. What circuit component allows current to flow in ONE direction only (and emits light when it is an LED): a diode (or light-emitting diode) or a fixed resistor?

    Diode (or light-emitting diode)

    A diode has low resistance in the forward direction and very high resistance in reverse.

  12. 12. What component has a resistance that decreases when brighter light shines on it (used in automatic street lights): a light-dependent resistor (LDR) or a thermistor?

    Light-dependent resistor (LDR)

    In bright light an LDR’s resistance falls; in darkness its resistance rises.

12 questions · Seed 104840 · Age guidance, not curriculum certification