Small practice. Bright discoveries.Explore the free starter collection
Back to worksheets
ScienceAges 10-12

Conductors, insulators & circuits

Compare conductors and insulators, series and parallel circuits, switches, fuses and circuit symbols. Review suitability for your learners before teaching.

New variationTry interactive challengeBrowse templates

Choose “Save as PDF” to keep a copy. Use your browser’s paper setting for A4 or Letter.

Worksheet StudioPractice pack · Ages 10-12

Conductors, insulators & circuits

Take your time. Show your thinking.

  1. 1. What happens if two identical cells in a torch are put in facing opposite directions (+ touching +): their voltages cancel out and the bulb will not light, or the bulb shines twice as bright?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  2. 2. What component has a resistance that decreases when brighter light shines on it (used in automatic street lights): a light-dependent resistor (LDR) or a thermistor?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  3. 3. Why should you NEVER touch mains electrical switches, plugs or sockets with wet hands: tap water contains dissolved salts (ions) that conduct electricity and can cause a dangerous electric shock, or water freezes the switch?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  4. 4. In a parallel circuit, how does the total current leaving the battery compare to the currents in the individual parallel branches: the total current equals the sum of the currents in the branches, or the total current is zero?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  5. 5. What happens when you open (turn off) a switch in a simple series circuit: it creates a gap (open circuit) that stops the current flowing and turns the bulb off, or it makes the bulb brighter?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  6. 6. What component has a resistance that changes significantly with temperature (used in digital thermometers and thermostats): a thermistor or a loudspeaker?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  7. 7. In a standard circuit diagram, what component is represented by a circle with the letter “M” inside it: an electric motor or a buzzer?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  8. 8. In a simple SERIES circuit with two bulbs in a single loop, if one bulb’s filament breaks (blows), what happens to the other bulb: it goes out too because the single circuit loop is broken, or it stays lit?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  9. 9. In a simple SERIES circuit containing one battery and two bulbs, if you add a third identical bulb in the same single loop, what happens to the brightness of the bulbs: they become dimmer because the voltage is shared and total resistance increases, or they become three times brighter?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  10. 10. Which non-metal form of carbon (used in pencil leads) is an exception because it DOES conduct electricity: graphite or rubber?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  11. 11. Which circuit instrument is connected IN SERIES in a loop to measure the electric current in amperes (A): an ammeter or a voltmeter?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  12. 12. For an electric current to flow and light up a bulb, what kind of path must the circuit form from one terminal of the battery to the other: a complete (closed) loop with no gaps, or a broken (open) loop?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
12 questions · Seed 104826 · Age guidance, not curriculum certification
View the answer key
Worksheet StudioAnswer key · Ages 10-12

Conductors, insulators & circuits

Answers and reasoning. Review before teaching.

  1. 1. What happens if two identical cells in a torch are put in facing opposite directions (+ touching +): their voltages cancel out and the bulb will not light, or the bulb shines twice as bright?

    Their voltages cancel out and the bulb will not light

    Cells in series must be aligned positive-to-negative so their voltages add together.

  2. 2. What component has a resistance that decreases when brighter light shines on it (used in automatic street lights): a light-dependent resistor (LDR) or a thermistor?

    Light-dependent resistor (LDR)

    In bright light an LDR’s resistance falls; in darkness its resistance rises.

  3. 3. Why should you NEVER touch mains electrical switches, plugs or sockets with wet hands: tap water contains dissolved salts (ions) that conduct electricity and can cause a dangerous electric shock, or water freezes the switch?

    Tap water contains dissolved salts (ions) that conduct electricity and can cause a dangerous electric shock

    Impure water is an electrical conductor and lowers the electrical resistance of skin.

  4. 4. In a parallel circuit, how does the total current leaving the battery compare to the currents in the individual parallel branches: the total current equals the sum of the currents in the branches, or the total current is zero?

    The total current equals the sum of the currents in the branches

    By Kirchhoff’s current law (conservation of charge), current splits at a junction and recombines on return.

  5. 5. What happens when you open (turn off) a switch in a simple series circuit: it creates a gap (open circuit) that stops the current flowing and turns the bulb off, or it makes the bulb brighter?

    It creates a gap (open circuit) that stops the current flowing and turns the bulb off

    A switch controls a circuit by safely opening or closing the conducting gap.

  6. 6. What component has a resistance that changes significantly with temperature (used in digital thermometers and thermostats): a thermistor or a loudspeaker?

    Thermistor

    A thermistor is a temperature-sensitive resistor.

  7. 7. In a standard circuit diagram, what component is represented by a circle with the letter “M” inside it: an electric motor or a buzzer?

    Electric motor

    A circle with an “M” represents an electric motor that converts electrical energy into kinetic rotation.

  8. 8. In a simple SERIES circuit with two bulbs in a single loop, if one bulb’s filament breaks (blows), what happens to the other bulb: it goes out too because the single circuit loop is broken, or it stays lit?

    It goes out too because the single circuit loop is broken

    A break anywhere in a series loop stops current throughout the entire loop.

  9. 9. In a simple SERIES circuit containing one battery and two bulbs, if you add a third identical bulb in the same single loop, what happens to the brightness of the bulbs: they become dimmer because the voltage is shared and total resistance increases, or they become three times brighter?

    They become dimmer because the voltage is shared and total resistance increases

    In a series loop, adding more bulbs increases resistance and splits the battery voltage across more components.

  10. 10. Which non-metal form of carbon (used in pencil leads) is an exception because it DOES conduct electricity: graphite or rubber?

    Graphite

    Graphite has delocalised electrons between its carbon layers, allowing it to conduct electricity.

  11. 11. Which circuit instrument is connected IN SERIES in a loop to measure the electric current in amperes (A): an ammeter or a voltmeter?

    Ammeter

    An ammeter has very low resistance and is placed in series so all the current flows through it.

  12. 12. For an electric current to flow and light up a bulb, what kind of path must the circuit form from one terminal of the battery to the other: a complete (closed) loop with no gaps, or a broken (open) loop?

    A complete (closed) loop with no gaps

    Current only flows around a continuous, closed conducting pathway.

12 questions · Seed 104826 · Age guidance, not curriculum certification