Small practice. Bright discoveries.Explore the free starter collection
Back to worksheets
ScienceAges 10-12

Conductors, insulators & circuits

Compare conductors and insulators, series and parallel circuits, switches, fuses and circuit symbols. Review suitability for your learners before teaching.

New variationTry interactive challengeBrowse templates

Choose “Save as PDF” to keep a copy. Use your browser’s paper setting for A4 or Letter.

Worksheet StudioPractice pack · Ages 10-12

Conductors, insulators & circuits

Take your time. Show your thinking.

  1. 1. In a standard circuit diagram, what component is represented by a circle with the letter “M” inside it: an electric motor or a buzzer?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  2. 2. In a series circuit, how does the electric current measured at different points around the single loop compare: the current is the SAME at every point in a series loop, or it gets used up by the bulb?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  3. 3. Which circuit instrument is connected IN SERIES in a loop to measure the electric current in amperes (A): an ammeter or a voltmeter?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  4. 4. In a simple SERIES circuit with two bulbs in a single loop, if one bulb’s filament breaks (blows), what happens to the other bulb: it goes out too because the single circuit loop is broken, or it stays lit?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  5. 5. What happens if two identical cells in a torch are put in facing opposite directions (+ touching +): their voltages cancel out and the bulb will not light, or the bulb shines twice as bright?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  6. 6. What component has a resistance that changes significantly with temperature (used in digital thermometers and thermostats): a thermistor or a loudspeaker?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  7. 7. What happens when you open (turn off) a switch in a simple series circuit: it creates a gap (open circuit) that stops the current flowing and turns the bulb off, or it makes the bulb brighter?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  8. 8. Why should you NEVER touch mains electrical switches, plugs or sockets with wet hands: tap water contains dissolved salts (ions) that conduct electricity and can cause a dangerous electric shock, or water freezes the switch?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  9. 9. What component has a resistance that decreases when brighter light shines on it (used in automatic street lights): a light-dependent resistor (LDR) or a thermistor?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  10. 10. What circuit component allows current to flow in ONE direction only (and emits light when it is an LED): a diode (or light-emitting diode) or a fixed resistor?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  11. 11. Which non-metal form of carbon (used in pencil leads) is an exception because it DOES conduct electricity: graphite or rubber?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
  12. 12. Why are the lights and sockets in a home wired in PARALLEL rather than in series: each light is on its own branch so it receives full voltage and can be switched on or off independently without turning off the others, or parallel uses no wire?

    +−R
    Cell (+) ── Switch ── (−) · Closed Series Loop
12 questions · Seed 104823 · Age guidance, not curriculum certification
View the answer key
Worksheet StudioAnswer key · Ages 10-12

Conductors, insulators & circuits

Answers and reasoning. Review before teaching.

  1. 1. In a standard circuit diagram, what component is represented by a circle with the letter “M” inside it: an electric motor or a buzzer?

    Electric motor

    A circle with an “M” represents an electric motor that converts electrical energy into kinetic rotation.

  2. 2. In a series circuit, how does the electric current measured at different points around the single loop compare: the current is the SAME at every point in a series loop, or it gets used up by the bulb?

    The current is the SAME at every point in a series loop

    Charge is conserved—the same number of coulombs per second passes every point in a single loop; energy is transferred, not current used up.

  3. 3. Which circuit instrument is connected IN SERIES in a loop to measure the electric current in amperes (A): an ammeter or a voltmeter?

    Ammeter

    An ammeter has very low resistance and is placed in series so all the current flows through it.

  4. 4. In a simple SERIES circuit with two bulbs in a single loop, if one bulb’s filament breaks (blows), what happens to the other bulb: it goes out too because the single circuit loop is broken, or it stays lit?

    It goes out too because the single circuit loop is broken

    A break anywhere in a series loop stops current throughout the entire loop.

  5. 5. What happens if two identical cells in a torch are put in facing opposite directions (+ touching +): their voltages cancel out and the bulb will not light, or the bulb shines twice as bright?

    Their voltages cancel out and the bulb will not light

    Cells in series must be aligned positive-to-negative so their voltages add together.

  6. 6. What component has a resistance that changes significantly with temperature (used in digital thermometers and thermostats): a thermistor or a loudspeaker?

    Thermistor

    A thermistor is a temperature-sensitive resistor.

  7. 7. What happens when you open (turn off) a switch in a simple series circuit: it creates a gap (open circuit) that stops the current flowing and turns the bulb off, or it makes the bulb brighter?

    It creates a gap (open circuit) that stops the current flowing and turns the bulb off

    A switch controls a circuit by safely opening or closing the conducting gap.

  8. 8. Why should you NEVER touch mains electrical switches, plugs or sockets with wet hands: tap water contains dissolved salts (ions) that conduct electricity and can cause a dangerous electric shock, or water freezes the switch?

    Tap water contains dissolved salts (ions) that conduct electricity and can cause a dangerous electric shock

    Impure water is an electrical conductor and lowers the electrical resistance of skin.

  9. 9. What component has a resistance that decreases when brighter light shines on it (used in automatic street lights): a light-dependent resistor (LDR) or a thermistor?

    Light-dependent resistor (LDR)

    In bright light an LDR’s resistance falls; in darkness its resistance rises.

  10. 10. What circuit component allows current to flow in ONE direction only (and emits light when it is an LED): a diode (or light-emitting diode) or a fixed resistor?

    Diode (or light-emitting diode)

    A diode has low resistance in the forward direction and very high resistance in reverse.

  11. 11. Which non-metal form of carbon (used in pencil leads) is an exception because it DOES conduct electricity: graphite or rubber?

    Graphite

    Graphite has delocalised electrons between its carbon layers, allowing it to conduct electricity.

  12. 12. Why are the lights and sockets in a home wired in PARALLEL rather than in series: each light is on its own branch so it receives full voltage and can be switched on or off independently without turning off the others, or parallel uses no wire?

    Each light is on its own branch so it receives full voltage and can be switched on or off independently without turning off the others

    In a parallel circuit, if one lamp fails or is switched off, current still flows through the other branches.

12 questions · Seed 104823 · Age guidance, not curriculum certification